Changeset 173

Timestamp:

Mar 2, 2007, 10:26:00 AM (17 years ago)

Author:

gerson bicca

Message:

updated types.mso

File:

• branches/newlanguage/eml/types.mso (modified) (6 diffs)

branches/newlanguage/eml/types.mso

@@ -46 +46 @@
 # Time
 time_h as positive (Brief = "Time in hours", Default=1, Upper=1e4, Unit = 'h');
-time_min as positive (Brief = "Time in minutes", Default=1, Upper=1e6, Unit = 'min');
+time_min as positive (Brief = "Time in minutes", Default=1, Upper=1e6, Unit ='min');
 time_sec as positive (Brief = "Time in seconds", Default=1, Upper=1e8, Unit = 's');
-frequency as positive(Brief = "Frequency", Default=1,Lower=0,Upper=100, Unit= '1/s');
+frequency as positive(Brief = "Frequency", Default=1,Lower=0,Upper=100, Unit='1/s');
 
 # Size related
-angle as Real (Brief = "Angle", Default=0, Lower=-7, Upper=7, Unit = 'rad');
-area as positive (Brief = "Area", Default=1, Upper=1E6, Unit = 'm^2');
+angle as Real (Brief = "Angle", Default=0, Lower=-7, Upper=7, Unit ='rad');
+area as positive (Brief = "Area", Default=1, Upper=1E6, Unit ='m^2');
 length as positive (Brief = "Length", Default=1, Upper=5e6, Unit = 'm');
 length_delta as length (Brief = "Difference of Length", Lower=-1000);
@@ -60 +60 @@
 
 # Eletric
-current     as positive (Brief = "Electrical Current", Default=10, Upper=1e12, Unit = 'A');
-charge      as Real (Brief = "Electrical Charge", Default=10, Lower=-1e12, Upper=1e12, Unit = 'C');
-capacitance as positive (Brief = "Electrical Capacitance", Default=10, Upper=1e12, Unit = 'F');
-indutance   as positive (Brief = "Electrical Indutance", Default=10, Upper=1e12, Unit = 'V*s/A');
+current     as positive (Brief = "Electrical Current", Default=10, Upper=1e12, Unit ='A');
+charge      as Real (Brief = "Electrical Charge", Default=10, Lower=-1e12, Upper=1e12, Unit ='C');
+capacitance as positive (Brief = "Electrical Capacitance", Default=10, Upper=1e12, Unit ='F');
+indutance   as positive (Brief = "Electrical Indutance", Default=10, Upper=1e12, Unit ='V*s/A');
 voltage     as positive (Brief = "Electrical Voltage", Default=100, Upper=1e9, Unit = 'V');
 resistance  as positive (Brief = "Eletrical Resistance", Default=50, Upper=800, Unit = 'ohm');
@@ -83 +83 @@
 # densities
 dens_mol as Real (Brief = "Molar Density", Default=1, Lower=1e-30, Upper=5e3, Unit = 'kmol/m^3');
-dens_mass as Real (Brief = "Mass Density", Default=1000, Lower=1e-30, Upper=5e5, Unit = 'kg/m^3');
+dens_mass as Real (Brief = "Mass Density", Default=1000, Lower=1e-30, Upper=5e5, Unit ='kg/m^3');
 
 # Concentration
@@ -105 +105 @@
 cp_mass as Real (Brief = "Mass Heat Capacity", Default=1.0, Lower=0.1, Upper=10.0, Unit = 'kJ/kg/K');  
 cp_mol as Real (Brief = "Molar Heat Capacity", Default=100, Lower=1, Upper=1e3, Unit = 'J/mol/K'); 
-cv_mol as Real (Brief = "Molar Heat Capacity", Default=100, Lower=1, Upper=1e3, Unit = 'J/mol/K');   
+cv_mol as Real (Brief = "Molar Heat Capacity", Default=100, Lower=1, Upper=1e3, Unit ='J/mol/K');   
 
 # Enthalpy
@@ -145 +145 @@
 
 # Flux
-flux_mol as positive (Brief = "Molar Flux", Default=1, Upper=1e4, Unit = 'kmol/s/m^2');
-flux_mol_delta as flux_mol (Brief = "Difference of Molar Flux", Lower=-1e4);
+flux_mol as positive (Brief = "Molar Flux", Default=1, Upper=1e4, Unit = 'kmol/s/m^2');   
+flux_mol_delta as flux_mol (Brief = "Difference of Molar Flux", Lower=-1e4);   
 flux_mass as positive (Brief = "Mass Flux", Default=1, Upper=1e6, Unit = 'kg/s/m^2');
 flux_mass_delta as flux_mass (Brief = "Difference of Mass Flux", Lower=-1e6);
@@ -176 +176 @@
 
 # Difusivity
-diffusivity as positive (Brief = "Diffusivity", Default=1e-3, Upper=1, Unit = 'cm^2/s');
+diffusivity as positive (Brief = "Diffusivity", Default=1e-3, Upper=1, Unit ='cm^2/s');  
 
 # Fugacity