1 | #*------------------------------------------------------------------- |
---|
2 | * EMSO Model Library (EML) Copyright (C) 2004 - 2007 ALSOC. |
---|
3 | * |
---|
4 | * This LIBRARY is free software; you can distribute it and/or modify |
---|
5 | * it under the therms of the ALSOC FREE LICENSE as available at |
---|
6 | * http://www.enq.ufrgs.br/alsoc. |
---|
7 | * |
---|
8 | * EMSO Copyright (C) 2004 - 2007 ALSOC, original code |
---|
9 | * from http://www.rps.eng.br Copyright (C) 2002-2004. |
---|
10 | * All rights reserved. |
---|
11 | * |
---|
12 | * EMSO is distributed under the therms of the ALSOC LICENSE as |
---|
13 | * available at http://www.enq.ufrgs.br/alsoc. |
---|
14 | * |
---|
15 | *---------------------------------------------------------------------- |
---|
16 | * File containg models of columns: distillation, stripping, absorbers |
---|
17 | * rectifier, .... |
---|
18 | * |
---|
19 | * The default nomenclature is: |
---|
20 | * Type_Column_reboilertype_condensertyper |
---|
21 | * |
---|
22 | * where: |
---|
23 | * Type = refluxed or reboiled or section |
---|
24 | * Column = Stripping, Absorption, Rectifier, Distillation |
---|
25 | * Reboiler type (if exists) = kettle or thermosyphon |
---|
26 | * Condenser type (if exists) = with subccoling or without subcooling |
---|
27 | * |
---|
28 | *----------------------------------------------------------------------- |
---|
29 | * Author: Paula B. Staudt |
---|
30 | * $Id: column.mso 300 2007-07-04 22:55:05Z arge $ |
---|
31 | *---------------------------------------------------------------------*# |
---|
32 | |
---|
33 | using "tray"; |
---|
34 | using "reboiler"; |
---|
35 | using "condenser"; |
---|
36 | using "mixers_splitters/splitter"; |
---|
37 | using "mixers_splitters/mixer"; |
---|
38 | using "tank"; |
---|
39 | using "pressure_changers/pump"; |
---|
40 | |
---|
41 | #*---------------------------------------------------------------------- |
---|
42 | * Model of a column section with: |
---|
43 | * - NTrays=number of trays. |
---|
44 | * |
---|
45 | *---------------------------------------------------------------------*# |
---|
46 | Model Section_Column |
---|
47 | ATTRIBUTES |
---|
48 | Pallete = true; |
---|
49 | Icon = "icon/SectionColumn"; |
---|
50 | Brief = "Model of a column section."; |
---|
51 | Info = |
---|
52 | "Model of a column section containing: |
---|
53 | * NTrays trays. |
---|
54 | |
---|
55 | Specify: |
---|
56 | * the feed stream of each tray (Inlet); |
---|
57 | * the Murphree eficiency for each tray Emv; |
---|
58 | * the InletL stream of the top tray; |
---|
59 | * the InletV stream of the bottom tray. |
---|
60 | |
---|
61 | Initial Conditions: |
---|
62 | * the trays temperature (OutletL.T); |
---|
63 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
64 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray. |
---|
65 | "; |
---|
66 | |
---|
67 | PARAMETERS |
---|
68 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
69 | outer NComp as Integer; |
---|
70 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
71 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
72 | top as Integer(Brief="Number of top tray"); |
---|
73 | bot as Integer(Brief="Number of bottom tray"); |
---|
74 | |
---|
75 | SET |
---|
76 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
77 | bot = NTrays/top; |
---|
78 | |
---|
79 | VARIABLES |
---|
80 | trays(NTrays) as tray; |
---|
81 | |
---|
82 | EQUATIONS |
---|
83 | "Pressure Drop through the tray" |
---|
84 | trays([top:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
85 | (trays([top:topdown:bot]).OutletV.P - |
---|
86 | trays([top:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
87 | trays([top:topdown:bot]).Ah/trays([top:topdown:bot]).vV * |
---|
88 | sqrt(2*(trays([top:topdown:bot]).OutletV.P - |
---|
89 | trays([top:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
90 | (trays([top:topdown:bot]).alfa*trays([top:topdown:bot]).rhoV)); |
---|
91 | |
---|
92 | CONNECTIONS |
---|
93 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
94 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
95 | end |
---|
96 | |
---|
97 | |
---|
98 | #*---------------------------------------------------------------------- |
---|
99 | * Model of a distillation column containing: |
---|
100 | * - NTrays like tray; |
---|
101 | * - a kettle reboiler; |
---|
102 | * - dymamic condenser; |
---|
103 | * - a splitter which separate reflux and distillate; |
---|
104 | * - a pump in reflux stream; |
---|
105 | *---------------------------------------------------------------------*# |
---|
106 | Model Distillation_kettle_cond |
---|
107 | ATTRIBUTES |
---|
108 | Pallete = true; |
---|
109 | Icon = "icon/DistillationKettleCond"; |
---|
110 | Brief = "Model of a distillation column with dynamic condenser and dynamic reboiler."; |
---|
111 | Info = |
---|
112 | "Specify: |
---|
113 | * the feed stream of each tray (Inlet); |
---|
114 | * the Murphree eficiency for each tray Emv; |
---|
115 | * the pump pressure difference; |
---|
116 | * the heat supllied in reboiler and condenser; |
---|
117 | * the condenser vapor outlet flow (OutletV.F); |
---|
118 | * the reboiler liquid outlet flow (OutletL.F); |
---|
119 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
120 | |
---|
121 | Initial Conditions: |
---|
122 | * the trays temperature (OutletL.T); |
---|
123 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
124 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
125 | |
---|
126 | * the condenser temperature (OutletL.T); |
---|
127 | * the condenser liquid level (Level); |
---|
128 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
129 | |
---|
130 | * the reboiler temperature (OutletL.T); |
---|
131 | * the reboiler liquid level (Level); |
---|
132 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
133 | "; |
---|
134 | |
---|
135 | PARAMETERS |
---|
136 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
137 | outer NComp as Integer; |
---|
138 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
139 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
140 | top as Integer(Brief="Number of top tray"); |
---|
141 | bot as Integer(Brief="Number of bottom tray"); |
---|
142 | |
---|
143 | SET |
---|
144 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
145 | bot = NTrays/top; |
---|
146 | |
---|
147 | VARIABLES |
---|
148 | trays(NTrays) as tray; |
---|
149 | cond as condenser; |
---|
150 | reb as reboiler; |
---|
151 | sptop as splitter; |
---|
152 | pump1 as pump; |
---|
153 | |
---|
154 | EQUATIONS |
---|
155 | if (reb.OutletV.P > reb.InletL.P) then |
---|
156 | "Pressure Drop through the reboiler" |
---|
157 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
158 | / (trays(bot).beta*reb.rhoV) ); |
---|
159 | else |
---|
160 | "No flow in reboiler" |
---|
161 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
162 | end |
---|
163 | |
---|
164 | "Pressure Drop through the tray" |
---|
165 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - cond.OutletL.P)/'Pa'))/2 * |
---|
166 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
167 | cond.OutletL.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
168 | |
---|
169 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
170 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
171 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
172 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
173 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
174 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
175 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
176 | |
---|
177 | CONNECTIONS |
---|
178 | #vapor |
---|
179 | reb.OutletV to trays(bot).InletV; |
---|
180 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
181 | trays(top).OutletV to cond.InletV; |
---|
182 | |
---|
183 | #liquid |
---|
184 | cond.OutletL to sptop.Inlet; |
---|
185 | sptop.Outlet2 to pump1.Inlet; |
---|
186 | pump1.Outlet to trays(top).InletL; |
---|
187 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
188 | trays(bot).OutletL to reb.InletL; |
---|
189 | end |
---|
190 | |
---|
191 | |
---|
192 | #* ------------------------------------------------------------------- |
---|
193 | * Distillation Column model with: |
---|
194 | * |
---|
195 | * - NTrays like tray; |
---|
196 | * - a vessel in the bottom of column; |
---|
197 | * - a splitter who separate the bottom product and the stream to reboiler; |
---|
198 | * - steady state reboiler (thermosyphon); |
---|
199 | * - a steady state condenser with subcooling; |
---|
200 | * - a vessel drum (layed cilinder); |
---|
201 | * - a splitter which separate reflux and distillate; |
---|
202 | * - a pump in reflux stream. |
---|
203 | * |
---|
204 | * ------------------------------------------------------------------*# |
---|
205 | Model Distillation_thermosyphon_subcooling |
---|
206 | ATTRIBUTES |
---|
207 | Pallete = true; |
---|
208 | Icon = "icon/DistillationThermosyphonSubcooling"; |
---|
209 | Brief = "Model of a distillation column with steady condenser and steady reboiler."; |
---|
210 | Info = |
---|
211 | "Specify: |
---|
212 | * the feed stream of each tray (Inlet); |
---|
213 | * the Murphree eficiency for each tray Emv; |
---|
214 | * the pump head; |
---|
215 | * the condenser pressure drop; |
---|
216 | * the heat supllied in top and bottom tanks; |
---|
217 | * the heat supllied in condenser and reboiler; |
---|
218 | * the Outlet1 flow in the bottom splitter (spbottom.Outlet1.F) that corresponds to the bottom product; |
---|
219 | * both top splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
220 | |
---|
221 | Initial Conditions: |
---|
222 | * the trays temperature (OutletL.T); |
---|
223 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
224 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
225 | |
---|
226 | * the top tank temperature (OutletL.T); |
---|
227 | * the top tank liquid level (Level); |
---|
228 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
229 | |
---|
230 | * the bottom tank temperature (OutletL.T); |
---|
231 | * the bottom tank liquid level (Level); |
---|
232 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
233 | "; |
---|
234 | |
---|
235 | PARAMETERS |
---|
236 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
237 | outer NComp as Integer; |
---|
238 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
239 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
240 | top as Integer(Brief="Number of top tray"); |
---|
241 | bot as Integer(Brief="Number of bottom tray"); |
---|
242 | |
---|
243 | SET |
---|
244 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
245 | bot = NTrays/top; |
---|
246 | |
---|
247 | VARIABLES |
---|
248 | trays(NTrays) as tray; |
---|
249 | cond as condenserSteady; |
---|
250 | reb as reboilerSteady; |
---|
251 | tbottom as tank; |
---|
252 | ttop as tank_cylindrical; |
---|
253 | spbottom as splitter; |
---|
254 | sptop as splitter; |
---|
255 | pump1 as pump; |
---|
256 | |
---|
257 | EQUATIONS |
---|
258 | if (reb.OutletV.P > reb.InletL.P) then |
---|
259 | "Pressure Drop through the reboiler" |
---|
260 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
261 | / (trays(bot).alfa*reb.rhoV) ); |
---|
262 | else |
---|
263 | "No flow in reboiler" |
---|
264 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
265 | end |
---|
266 | |
---|
267 | "Pressure Drop through the tray" |
---|
268 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - ttop.Outlet.P)/'Pa'))/2 * |
---|
269 | trays(top).Ah/trays(top).vV /2* sqrt(2*(trays(top).OutletV.P - |
---|
270 | ttop.Outlet.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
271 | |
---|
272 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
273 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
274 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
275 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV /2* |
---|
276 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
277 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
278 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
279 | |
---|
280 | CONNECTIONS |
---|
281 | #vapor |
---|
282 | reb.OutletV to trays(bot).InletV; |
---|
283 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
284 | trays(top).OutletV to cond.InletV; |
---|
285 | |
---|
286 | #liquid |
---|
287 | cond.OutletL to ttop.Inlet; |
---|
288 | ttop.Outlet to sptop.Inlet; |
---|
289 | sptop.Outlet2 to pump1.Inlet; |
---|
290 | pump1.Outlet to trays(top).InletL; |
---|
291 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
292 | trays(bot).OutletL to tbottom.Inlet; |
---|
293 | tbottom.Outlet to spbottom.Inlet; |
---|
294 | spbottom.Outlet2 to reb.InletL; |
---|
295 | end |
---|
296 | |
---|
297 | |
---|
298 | #* ------------------------------------------------------------------- |
---|
299 | * Distillation Column model with: |
---|
300 | * |
---|
301 | * - NTrays like tray; |
---|
302 | * - a vessel in the bottom of column; |
---|
303 | * - a splitter who separate the bottom product and the stream to reboiler; |
---|
304 | * - steady state reboiler (thermosyphon); |
---|
305 | * - a dynamic condenser without subcooling; |
---|
306 | * - a splitter which separate reflux and distillate; |
---|
307 | * - a pump in reflux stream. |
---|
308 | * |
---|
309 | * ------------------------------------------------------------------*# |
---|
310 | Model Distillation_thermosyphon_cond |
---|
311 | ATTRIBUTES |
---|
312 | Pallete = true; |
---|
313 | Icon = "icon/DistillationThermosyphonCond"; |
---|
314 | Brief = "Model of a distillation column with dynamic condenser and steady reboiler."; |
---|
315 | Info = |
---|
316 | "Specify: |
---|
317 | * the feed stream of each tray (Inlet); |
---|
318 | * the Murphree eficiency for each tray Emv; |
---|
319 | * the pump head; |
---|
320 | * the condenser vapor outlet flow (OutletV.F); |
---|
321 | * the heat supllied in bottom tank; |
---|
322 | * the heat supllied in condenser and reboiler; |
---|
323 | * the Outlet1 flow in the bottom splitter (spbottom.Outlet1.F) that corresponds to the bottom product; |
---|
324 | |
---|
325 | Initial Conditions: |
---|
326 | * the trays temperature (OutletL.T); |
---|
327 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
328 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
329 | |
---|
330 | * the condenser temperature (OutletL.T); |
---|
331 | * the condenser liquid level (Level); |
---|
332 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
333 | |
---|
334 | * the bottom tank temperature (OutletL.T); |
---|
335 | * the bottom tank liquid level (Level); |
---|
336 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
337 | "; |
---|
338 | |
---|
339 | PARAMETERS |
---|
340 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
341 | outer NComp as Integer; |
---|
342 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
343 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
344 | top as Integer(Brief="Number of top tray"); |
---|
345 | bot as Integer(Brief="Number of bottom tray"); |
---|
346 | |
---|
347 | SET |
---|
348 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
349 | bot = NTrays/top; |
---|
350 | |
---|
351 | VARIABLES |
---|
352 | trays(NTrays) as tray; |
---|
353 | cond as condenser; |
---|
354 | reb as reboilerSteady; |
---|
355 | tbottom as tank; |
---|
356 | spbottom as splitter; |
---|
357 | sptop as splitter; |
---|
358 | pump1 as pump; |
---|
359 | |
---|
360 | EQUATIONS |
---|
361 | if (reb.OutletV.P > reb.InletL.P) then |
---|
362 | "Pressure Drop through the reboiler" |
---|
363 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
364 | / (trays(bot).alfa*reb.rhoV) ); |
---|
365 | else |
---|
366 | "No flow in reboiler" |
---|
367 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
368 | end |
---|
369 | |
---|
370 | "Pressure Drop through the tray" |
---|
371 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - cond.OutletL.P)/'Pa'))/2 * |
---|
372 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
373 | cond.OutletL.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
374 | |
---|
375 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
376 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
377 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
378 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
379 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
380 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
381 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
382 | |
---|
383 | CONNECTIONS |
---|
384 | #vapor |
---|
385 | reb.OutletV to trays(bot).InletV; |
---|
386 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
387 | trays(top).OutletV to cond.InletV; |
---|
388 | |
---|
389 | #liquid |
---|
390 | cond.OutletL to sptop.Inlet; |
---|
391 | sptop.Outlet2 to pump1.Inlet; |
---|
392 | pump1.Outlet to trays(top).InletL; |
---|
393 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
394 | trays(bot).OutletL to tbottom.Inlet; |
---|
395 | tbottom.Outlet to spbottom.Inlet; |
---|
396 | spbottom.Outlet2 to reb.InletL; |
---|
397 | end |
---|
398 | |
---|
399 | #* ------------------------------------------------------------------- |
---|
400 | * Distillation Column model with: |
---|
401 | * |
---|
402 | * - NTrays like tray; |
---|
403 | * - a kettle reboiler; |
---|
404 | * - a steady state condenser with subcooling; |
---|
405 | * - a vessel drum (layed cilinder); |
---|
406 | * - a splitter which separate reflux and distillate; |
---|
407 | * - a pump in reflux stream. |
---|
408 | * |
---|
409 | * ------------------------------------------------------------------*# |
---|
410 | Model Distillation_kettle_subcooling |
---|
411 | ATTRIBUTES |
---|
412 | Pallete = true; |
---|
413 | Icon = "icon/DistillationKettleSubcooling"; |
---|
414 | Brief = "Model of a distillation column with steady condenser and dynamic reboiler."; |
---|
415 | Info = |
---|
416 | "Specify: |
---|
417 | * the feed stream of each tray (Inlet); |
---|
418 | * the Murphree eficiency for each tray (Emv); |
---|
419 | * the pump pressure difference; |
---|
420 | * the heat supllied in reboiler and condenser; |
---|
421 | * the heat supllied in the top tank; |
---|
422 | * the condenser pressure drop; |
---|
423 | * the reboiler liquid outlet flow (OutletL.F); |
---|
424 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
425 | |
---|
426 | Initial Conditions: |
---|
427 | * the trays temperature (OutletL.T); |
---|
428 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
429 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
430 | |
---|
431 | * the top tank temperature (OutletL.T); |
---|
432 | * the top tank liquid level (Level); |
---|
433 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
434 | |
---|
435 | * the reboiler temperature (OutletL.T); |
---|
436 | * the reboiler liquid level (Level); |
---|
437 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
438 | "; |
---|
439 | |
---|
440 | PARAMETERS |
---|
441 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
442 | outer NComp as Integer; |
---|
443 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
444 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
445 | top as Integer(Brief="Number of top tray"); |
---|
446 | bot as Integer(Brief="Number of bottom tray"); |
---|
447 | |
---|
448 | SET |
---|
449 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
450 | bot = NTrays/top; |
---|
451 | |
---|
452 | VARIABLES |
---|
453 | trays(NTrays) as tray; |
---|
454 | cond as condenserSteady; |
---|
455 | reb as reboiler; |
---|
456 | ttop as tank_cylindrical; |
---|
457 | sptop as splitter; |
---|
458 | pump1 as pump; |
---|
459 | |
---|
460 | EQUATIONS |
---|
461 | if (reb.OutletV.P > reb.InletL.P) then |
---|
462 | "Pressure Drop through the reboiler" |
---|
463 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
464 | / (trays(bot).beta*reb.rhoV) ); |
---|
465 | else |
---|
466 | "No flow in reboiler" |
---|
467 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
468 | end |
---|
469 | |
---|
470 | "Pressure Drop through the tray" |
---|
471 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - ttop.Outlet.P)/'Pa'))/2 * |
---|
472 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
473 | ttop.Outlet.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
474 | |
---|
475 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
476 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
477 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
478 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
479 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
480 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
481 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
482 | |
---|
483 | CONNECTIONS |
---|
484 | #vapor |
---|
485 | reb.OutletV to trays(bot).InletV; |
---|
486 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
487 | trays(top).OutletV to cond.InletV; |
---|
488 | |
---|
489 | #liquid |
---|
490 | cond.OutletL to ttop.Inlet; |
---|
491 | ttop.Outlet to sptop.Inlet; |
---|
492 | sptop.Outlet2 to pump1.Inlet; |
---|
493 | pump1.Outlet to trays(top).InletL; |
---|
494 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
495 | trays(bot).OutletL to reb.InletL; |
---|
496 | end |
---|
497 | |
---|
498 | |
---|
499 | #*---------------------------------------------------------------------- |
---|
500 | * Model of a rectifier containing: |
---|
501 | * - NTrays like tray; |
---|
502 | * - dymamic condenser without subcooling; |
---|
503 | * - a splitter which separate reflux and distillate; |
---|
504 | * - a pump in reflux stream; |
---|
505 | *---------------------------------------------------------------------*# |
---|
506 | Model Rectifier |
---|
507 | ATTRIBUTES |
---|
508 | Pallete = true; |
---|
509 | Icon = "icon/RefluxedCond"; |
---|
510 | Brief = "Model of a rectifier column with dynamic condenser."; |
---|
511 | Info = |
---|
512 | "Specify: |
---|
513 | * the feed stream of each tray (Inlet); |
---|
514 | * the Murphree eficiency for each tray Emv; |
---|
515 | * the InletV stream of the bottom tray; |
---|
516 | * the pump pressure difference; |
---|
517 | * the heat supllied in the condenser; |
---|
518 | * the condenser vapor outlet flow (OutletV.F); |
---|
519 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
520 | |
---|
521 | Initial Conditions: |
---|
522 | * the trays temperature (OutletL.T); |
---|
523 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
524 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
525 | |
---|
526 | * the condenser temperature (OutletL.T); |
---|
527 | * the condenser liquid level (Level); |
---|
528 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
529 | "; |
---|
530 | |
---|
531 | PARAMETERS |
---|
532 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
533 | outer NComp as Integer; |
---|
534 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
535 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
536 | top as Integer(Brief="Number of top tray"); |
---|
537 | bot as Integer(Brief="Number of bottom tray"); |
---|
538 | |
---|
539 | SET |
---|
540 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
541 | bot = NTrays/top; |
---|
542 | |
---|
543 | VARIABLES |
---|
544 | trays(NTrays) as tray; |
---|
545 | cond as condenser; |
---|
546 | sptop as splitter; |
---|
547 | pump1 as pump; |
---|
548 | |
---|
549 | EQUATIONS |
---|
550 | "Pressure Drop through the tray" |
---|
551 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - cond.OutletL.P)/'Pa'))/2 * |
---|
552 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
553 | cond.OutletL.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
554 | |
---|
555 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
556 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
557 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
558 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
559 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
560 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
561 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
562 | |
---|
563 | CONNECTIONS |
---|
564 | #vapor |
---|
565 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
566 | trays(top).OutletV to cond.InletV; |
---|
567 | |
---|
568 | #liquid |
---|
569 | cond.OutletL to sptop.Inlet; |
---|
570 | sptop.Outlet2 to pump1.Inlet; |
---|
571 | pump1.Outlet to trays(top).InletL; |
---|
572 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
573 | end |
---|
574 | |
---|
575 | |
---|
576 | #* ------------------------------------------------------------------- |
---|
577 | * Rectifier Column with: |
---|
578 | * |
---|
579 | * - NTrays like tray; |
---|
580 | * - a steady state condenser with subcooling; |
---|
581 | * - a vessel drum (layed cilinder); |
---|
582 | * - a splitter which separate reflux and distillate; |
---|
583 | * - a pump in reflux stream. |
---|
584 | * |
---|
585 | * ------------------------------------------------------------------*# |
---|
586 | Model Rectifier_subcooling |
---|
587 | ATTRIBUTES |
---|
588 | Pallete = true; |
---|
589 | Icon = "icon/RefluxedSubcooling"; |
---|
590 | Brief = "Model of a rectifier column with steady condenser."; |
---|
591 | Info = |
---|
592 | "Specify: |
---|
593 | * the feed stream of each tray (Inlet); |
---|
594 | * the Murphree eficiency for each tray Emv; |
---|
595 | * the InletV stream of the bottom tray; |
---|
596 | * the pump head; |
---|
597 | * the condenser pressure drop; |
---|
598 | * the heat supllied in the top tank; |
---|
599 | * the heat supllied in condenser; |
---|
600 | * both top splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
601 | |
---|
602 | Initial Conditions: |
---|
603 | * the trays temperature (OutletL.T); |
---|
604 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
605 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
606 | |
---|
607 | * the top tank temperature (OutletL.T); |
---|
608 | * the top tank liquid level (Level); |
---|
609 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
610 | "; |
---|
611 | |
---|
612 | PARAMETERS |
---|
613 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
614 | outer NComp as Integer; |
---|
615 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
616 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
617 | top as Integer(Brief="Number of top tray"); |
---|
618 | bot as Integer(Brief="Number of bottom tray"); |
---|
619 | |
---|
620 | SET |
---|
621 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
622 | bot = NTrays/top; |
---|
623 | |
---|
624 | VARIABLES |
---|
625 | trays(NTrays) as tray; |
---|
626 | cond as condenserSteady; |
---|
627 | ttop as tank_cylindrical; |
---|
628 | sptop as splitter; |
---|
629 | pump1 as pump; |
---|
630 | |
---|
631 | EQUATIONS |
---|
632 | "Pressure Drop through the tray" |
---|
633 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - ttop.Outlet.P)/'Pa'))/2 * |
---|
634 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
635 | ttop.Outlet.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
636 | |
---|
637 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
638 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
639 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
640 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
641 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
642 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
643 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
644 | |
---|
645 | CONNECTIONS |
---|
646 | #vapor |
---|
647 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
648 | trays(top).OutletV to cond.InletV; |
---|
649 | |
---|
650 | #liquid |
---|
651 | cond.OutletL to ttop.Inlet; |
---|
652 | ttop.Outlet to sptop.Inlet; |
---|
653 | sptop.Outlet2 to pump1.Inlet; |
---|
654 | pump1.Outlet to trays(top).InletL; |
---|
655 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
656 | end |
---|
657 | |
---|
658 | |
---|
659 | #*---------------------------------------------------------------------- |
---|
660 | * Model of a Refluxed Stripping column containing: |
---|
661 | * - NTrays like tray; |
---|
662 | * - dymamic condenser without subcooling; |
---|
663 | * - a splitter which separate reflux and distillate; |
---|
664 | * - a pump in reflux stream; |
---|
665 | *---------------------------------------------------------------------*# |
---|
666 | Model Refluxed_Stripping |
---|
667 | ATTRIBUTES |
---|
668 | Pallete = true; |
---|
669 | Icon = "icon/RefluxedCond"; |
---|
670 | Brief = "Model of a refluxed stripping column with dynamic condenser."; |
---|
671 | Info = |
---|
672 | "Specify: |
---|
673 | * the feed stream of each tray (Inlet); |
---|
674 | * the Murphree eficiency for each tray Emv; |
---|
675 | * the InletV stream of the bottom tray; |
---|
676 | * the pump pressure difference; |
---|
677 | * the heat supllied in the condenser; |
---|
678 | * the condenser vapor outlet flow (OutletV.F); |
---|
679 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
680 | |
---|
681 | Initial Conditions: |
---|
682 | * the trays temperature (OutletL.T); |
---|
683 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
684 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
685 | |
---|
686 | * the condenser temperature (OutletL.T); |
---|
687 | * the condenser liquid level (Level); |
---|
688 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
689 | "; |
---|
690 | |
---|
691 | PARAMETERS |
---|
692 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
693 | outer NComp as Integer; |
---|
694 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
695 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
696 | top as Integer(Brief="Number of top tray"); |
---|
697 | bot as Integer(Brief="Number of bottom tray"); |
---|
698 | |
---|
699 | SET |
---|
700 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
701 | bot = NTrays/top; |
---|
702 | |
---|
703 | VARIABLES |
---|
704 | trays(NTrays) as tray; |
---|
705 | cond as condenser; |
---|
706 | sptop as splitter; |
---|
707 | pump1 as pump; |
---|
708 | |
---|
709 | EQUATIONS |
---|
710 | "Pressure Drop through the tray" |
---|
711 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - cond.OutletL.P)/'Pa'))/2 * |
---|
712 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
713 | cond.OutletL.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
714 | |
---|
715 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
716 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
717 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
718 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
719 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
720 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
721 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
722 | |
---|
723 | CONNECTIONS |
---|
724 | #vapor |
---|
725 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
726 | trays(top).OutletV to cond.InletV; |
---|
727 | |
---|
728 | #liquid |
---|
729 | cond.OutletL to sptop.Inlet; |
---|
730 | sptop.Outlet2 to pump1.Inlet; |
---|
731 | pump1.Outlet to trays(top).InletL; |
---|
732 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
733 | end |
---|
734 | |
---|
735 | |
---|
736 | #* ------------------------------------------------------------------- |
---|
737 | * Refluxed Stripping Column with: |
---|
738 | * |
---|
739 | * - NTrays like tray; |
---|
740 | * - a steady state condenser (with subcooling); |
---|
741 | * - a vessel drum (layed cilinder); |
---|
742 | * - a splitter which separate reflux and distillate; |
---|
743 | * - a pump in reflux stream. |
---|
744 | * |
---|
745 | * ------------------------------------------------------------------*# |
---|
746 | Model Refluxed_Stripping_subcooling |
---|
747 | ATTRIBUTES |
---|
748 | Pallete = true; |
---|
749 | Icon = "icon/RefluxedSubcooling"; |
---|
750 | Brief = "Model of a refluxed stripping column with steady condenser."; |
---|
751 | Info = |
---|
752 | "Specify: |
---|
753 | * the feed stream of each tray (Inlet); |
---|
754 | * the Murphree eficiency for each tray Emv; |
---|
755 | * the InletV stream of the bottom tray; |
---|
756 | * the pump head; |
---|
757 | * the condenser pressure drop; |
---|
758 | * the heat supllied in the top tank; |
---|
759 | * the heat supllied in condenser; |
---|
760 | * both top splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
761 | |
---|
762 | Initial Conditions: |
---|
763 | * the trays temperature (OutletL.T); |
---|
764 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
765 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
766 | |
---|
767 | * the top tank temperature (OutletL.T); |
---|
768 | * the top tank liquid level (Level); |
---|
769 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
770 | "; |
---|
771 | |
---|
772 | PARAMETERS |
---|
773 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
774 | outer NComp as Integer; |
---|
775 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
776 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
777 | top as Integer(Brief="Number of top tray"); |
---|
778 | bot as Integer(Brief="Number of bottom tray"); |
---|
779 | |
---|
780 | SET |
---|
781 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
782 | bot = NTrays/top; |
---|
783 | |
---|
784 | VARIABLES |
---|
785 | trays(NTrays) as tray; |
---|
786 | cond as condenserSteady; |
---|
787 | ttop as tank_cylindrical; |
---|
788 | sptop as splitter; |
---|
789 | pump1 as pump; |
---|
790 | |
---|
791 | EQUATIONS |
---|
792 | "Pressure Drop through the tray" |
---|
793 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - ttop.Outlet.P)/'Pa'))/2 * |
---|
794 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
795 | ttop.Outlet.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
796 | |
---|
797 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
798 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
799 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
800 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
801 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
802 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
803 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
804 | |
---|
805 | CONNECTIONS |
---|
806 | #vapor |
---|
807 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
808 | trays(top).OutletV to cond.InletV; |
---|
809 | |
---|
810 | #liquid |
---|
811 | cond.OutletL to ttop.Inlet; |
---|
812 | ttop.Outlet to sptop.Inlet; |
---|
813 | sptop.Outlet2 to pump1.Inlet; |
---|
814 | pump1.Outlet to trays(top).InletL; |
---|
815 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
816 | end |
---|
817 | |
---|
818 | |
---|
819 | #*---------------------------------------------------------------------- |
---|
820 | * Model of a Refluxed Absorption column containing: |
---|
821 | * - NTrays like tray; |
---|
822 | * - dymamic condenser without subcooling; |
---|
823 | * - a splitter which separate reflux and distillate; |
---|
824 | * - a pump in reflux stream; |
---|
825 | *---------------------------------------------------------------------*# |
---|
826 | Model Refluxed_Absorption |
---|
827 | ATTRIBUTES |
---|
828 | Pallete = true; |
---|
829 | Icon = "icon/RefluxedCond"; |
---|
830 | Brief = "Model of a refluxed absorption column with dynamic condenser."; |
---|
831 | Info = |
---|
832 | "Specify: |
---|
833 | * the feed stream of each tray (Inlet); |
---|
834 | * the Murphree eficiency for each tray Emv; |
---|
835 | * the InletV stream of the bottom tray; |
---|
836 | * the pump pressure difference; |
---|
837 | * the heat supllied in the condenser; |
---|
838 | * the condenser vapor outlet flow (OutletV.F); |
---|
839 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
840 | |
---|
841 | Initial Conditions: |
---|
842 | * the trays temperature (OutletL.T); |
---|
843 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
844 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
845 | |
---|
846 | * the condenser temperature (OutletL.T); |
---|
847 | * the condenser liquid level (Level); |
---|
848 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
849 | "; |
---|
850 | |
---|
851 | PARAMETERS |
---|
852 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
853 | outer NComp as Integer; |
---|
854 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
855 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
856 | top as Integer(Brief="Number of top tray"); |
---|
857 | bot as Integer(Brief="Number of bottom tray"); |
---|
858 | |
---|
859 | SET |
---|
860 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
861 | bot = NTrays/top; |
---|
862 | |
---|
863 | VARIABLES |
---|
864 | trays(NTrays) as tray; |
---|
865 | cond as condenser; |
---|
866 | sptop as splitter; |
---|
867 | pump1 as pump; |
---|
868 | |
---|
869 | EQUATIONS |
---|
870 | "Pressure Drop through the tray" |
---|
871 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - cond.OutletL.P)/'Pa'))/2 * |
---|
872 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
873 | cond.OutletL.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
874 | |
---|
875 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
876 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
877 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
878 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
879 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
880 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
881 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
882 | |
---|
883 | CONNECTIONS |
---|
884 | #vapor |
---|
885 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
886 | trays(top).OutletV to cond.InletV; |
---|
887 | |
---|
888 | #liquid |
---|
889 | cond.OutletL to cond.InletV; |
---|
890 | cond.OutletL to sptop.Inlet; |
---|
891 | sptop.Outlet2 to pump1.Inlet; |
---|
892 | pump1.Outlet to trays(top).InletL; |
---|
893 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
894 | end |
---|
895 | |
---|
896 | |
---|
897 | #* ------------------------------------------------------------------- |
---|
898 | * Refluxed Absorption Column with: |
---|
899 | * |
---|
900 | * - NTrays like tray; |
---|
901 | * - a steady state condenser (with subcooling); |
---|
902 | * - a vessel drum (layed cilinder); |
---|
903 | * - a splitter which separate reflux and distillate; |
---|
904 | * - a pump in reflux stream. |
---|
905 | * |
---|
906 | * ------------------------------------------------------------------*# |
---|
907 | Model Refluxed_Absorption_subcooling |
---|
908 | ATTRIBUTES |
---|
909 | Pallete = true; |
---|
910 | Icon = "icon/RefluxedSubcooling"; |
---|
911 | Brief = "Model of a refluxed absorption column with steady condenser."; |
---|
912 | Info = |
---|
913 | "Specify: |
---|
914 | * the feed stream of each tray (Inlet); |
---|
915 | * the Murphree eficiency for each tray Emv; |
---|
916 | * the InletV stream of the bottom tray; |
---|
917 | * the pump head; |
---|
918 | * the condenser pressure drop; |
---|
919 | * the heat supllied in the top tank; |
---|
920 | * the heat supllied in condenser; |
---|
921 | * both top splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
922 | |
---|
923 | Initial Conditions: |
---|
924 | * the trays temperature (OutletL.T); |
---|
925 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
926 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
927 | |
---|
928 | * the top tank temperature (OutletL.T); |
---|
929 | * the top tank liquid level (Level); |
---|
930 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
931 | "; |
---|
932 | |
---|
933 | PARAMETERS |
---|
934 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
935 | outer NComp as Integer; |
---|
936 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
937 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
938 | top as Integer(Brief="Number of top tray"); |
---|
939 | bot as Integer(Brief="Number of bottom tray"); |
---|
940 | |
---|
941 | SET |
---|
942 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
943 | bot = NTrays/top; |
---|
944 | |
---|
945 | VARIABLES |
---|
946 | trays(NTrays) as tray; |
---|
947 | cond as condenserSteady; |
---|
948 | ttop as tank_cylindrical; |
---|
949 | sptop as splitter; |
---|
950 | pump1 as pump; |
---|
951 | |
---|
952 | EQUATIONS |
---|
953 | "Pressure Drop through the tray" |
---|
954 | trays(top).OutletV.F = (1 + tanh(1 * (trays(top).OutletV.P - ttop.Outlet.P)/'Pa'))/2 * |
---|
955 | trays(top).Ah/trays(top).vV * sqrt(2*(trays(top).OutletV.P - |
---|
956 | ttop.Outlet.P + 1e-8 * 'atm') / (trays(top).alfa*trays(top).rhoV)); |
---|
957 | |
---|
958 | trays([top+topdown:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
959 | (trays([top+topdown:topdown:bot]).OutletV.P - |
---|
960 | trays([top+topdown:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
961 | trays([top+topdown:topdown:bot]).Ah/trays([top+topdown:topdown:bot]).vV * |
---|
962 | sqrt(2*(trays([top+topdown:topdown:bot]).OutletV.P - |
---|
963 | trays([top+topdown:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
964 | (trays([top+topdown:topdown:bot]).alfa*trays([top+topdown:topdown:bot]).rhoV)); |
---|
965 | |
---|
966 | CONNECTIONS |
---|
967 | #vapor |
---|
968 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
969 | trays(top).OutletV to cond.InletV; |
---|
970 | |
---|
971 | #liquid |
---|
972 | cond.OutletL to ttop.Inlet; |
---|
973 | ttop.Outlet to sptop.Inlet; |
---|
974 | sptop.Outlet2 to pump1.Inlet; |
---|
975 | pump1.Outlet to trays(top).InletL; |
---|
976 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
977 | end |
---|
978 | |
---|
979 | |
---|
980 | #* ------------------------------------------------------------------- |
---|
981 | * Reboiled Stripping Column model with: |
---|
982 | * |
---|
983 | * - NTrays like tray; |
---|
984 | * - a kettle reboiler; |
---|
985 | * |
---|
986 | * ------------------------------------------------------------------*# |
---|
987 | Model Reboiled_Stripping_kettle |
---|
988 | ATTRIBUTES |
---|
989 | Pallete = true; |
---|
990 | Icon = "icon/ReboiledKettle"; |
---|
991 | Brief = "Model of a reboiled stripping column with dynamic reboiler."; |
---|
992 | Info = |
---|
993 | "Specify: |
---|
994 | * the feed stream of each tray (Inlet); |
---|
995 | * the Murphree eficiency for each tray Emv; |
---|
996 | * the InletL stream of the top tray; |
---|
997 | * the heat supllied in the reboiler; |
---|
998 | * the reboiler liquid outlet flow (OutletL.F); |
---|
999 | |
---|
1000 | Initial Conditions: |
---|
1001 | * the trays temperature (OutletL.T); |
---|
1002 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
1003 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
1004 | |
---|
1005 | * the reboiler temperature (OutletL.T); |
---|
1006 | * the reboiler liquid level (Level); |
---|
1007 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
1008 | "; |
---|
1009 | |
---|
1010 | PARAMETERS |
---|
1011 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
1012 | outer NComp as Integer; |
---|
1013 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
1014 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
1015 | top as Integer(Brief="Number of top tray"); |
---|
1016 | bot as Integer(Brief="Number of bottom tray"); |
---|
1017 | |
---|
1018 | SET |
---|
1019 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
1020 | bot = NTrays/top; |
---|
1021 | |
---|
1022 | VARIABLES |
---|
1023 | trays(NTrays) as tray; |
---|
1024 | reb as reboiler; |
---|
1025 | |
---|
1026 | EQUATIONS |
---|
1027 | if (reb.OutletV.P > reb.InletL.P) then |
---|
1028 | "Pressure Drop through the tray" |
---|
1029 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
1030 | / (trays(bot).beta*reb.rhoV) ); |
---|
1031 | else |
---|
1032 | "Prato selado" |
---|
1033 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
1034 | end |
---|
1035 | |
---|
1036 | "Pressure Drop through the tray" |
---|
1037 | trays([top:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
1038 | (trays([top:topdown:bot]).OutletV.P - |
---|
1039 | trays([top:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
1040 | trays([top:topdown:bot]).Ah/trays([top:topdown:bot]).vV * |
---|
1041 | sqrt(2*(trays([top:topdown:bot]).OutletV.P - |
---|
1042 | trays([top:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
1043 | (trays([top:topdown:bot]).alfa*trays([top:topdown:bot]).rhoV)); |
---|
1044 | |
---|
1045 | CONNECTIONS |
---|
1046 | #vapor |
---|
1047 | reb.OutletV to trays(bot).InletV; |
---|
1048 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
1049 | |
---|
1050 | #liquid |
---|
1051 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
1052 | trays(bot).OutletL to reb.InletL; |
---|
1053 | end |
---|
1054 | |
---|
1055 | |
---|
1056 | #* ------------------------------------------------------------------- |
---|
1057 | * Reboiled Stripping Column model with: |
---|
1058 | * |
---|
1059 | * - NTrays like tray; |
---|
1060 | * - a vessel in the bottom of column; |
---|
1061 | * - a splitter which separate the bottom product and the stream to reboiler; |
---|
1062 | * - steady state reboiler (thermosyphon); |
---|
1063 | * |
---|
1064 | * ------------------------------------------------------------------*# |
---|
1065 | Model Reboiled_Stripping_thermosyphon |
---|
1066 | ATTRIBUTES |
---|
1067 | Pallete = true; |
---|
1068 | Icon = "icon/ReboiledThermosyphon"; |
---|
1069 | Brief = "Model of a reboiled stripping column with steady reboiler."; |
---|
1070 | Info = |
---|
1071 | "Specify: |
---|
1072 | * the feed stream of each tray (Inlet); |
---|
1073 | * the Murphree eficiency for each tray (Emv); |
---|
1074 | * the InletL stream of the top tray; |
---|
1075 | * the heat supllied in bottom tank; |
---|
1076 | * the heat supllied in the reboiler; |
---|
1077 | * the Outlet1 flow in the bottom splitter (spbottom.Outlet1.F) that corresponds to the bottom product; |
---|
1078 | |
---|
1079 | Initial Conditions: |
---|
1080 | * the trays temperature (OutletL.T); |
---|
1081 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
1082 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
1083 | |
---|
1084 | * the bottom tank temperature (OutletL.T); |
---|
1085 | * the bottom tank liquid level (Level); |
---|
1086 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
1087 | "; |
---|
1088 | |
---|
1089 | PARAMETERS |
---|
1090 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
1091 | outer NComp as Integer; |
---|
1092 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
1093 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
1094 | top as Integer(Brief="Number of top tray"); |
---|
1095 | bot as Integer(Brief="Number of bottom tray"); |
---|
1096 | |
---|
1097 | SET |
---|
1098 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
1099 | bot = NTrays/top; |
---|
1100 | |
---|
1101 | VARIABLES |
---|
1102 | trays(NTrays) as tray; |
---|
1103 | reb as reboilerSteady; |
---|
1104 | spbottom as splitter; |
---|
1105 | tbottom as tank; |
---|
1106 | |
---|
1107 | EQUATIONS |
---|
1108 | if (reb.OutletV.P > reb.InletL.P) then |
---|
1109 | "Pressure Drop through the tray" |
---|
1110 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
1111 | / (trays(bot).alfa*reb.rhoV) ); |
---|
1112 | else |
---|
1113 | "Prato selado" |
---|
1114 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
1115 | end |
---|
1116 | |
---|
1117 | "Pressure Drop through the tray" |
---|
1118 | trays([top:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
1119 | (trays([top:topdown:bot]).OutletV.P - |
---|
1120 | trays([top:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
1121 | trays([top:topdown:bot]).Ah/trays([top:topdown:bot]).vV * |
---|
1122 | sqrt(2*(trays([top:topdown:bot]).OutletV.P - |
---|
1123 | trays([top:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
1124 | (trays([top:topdown:bot]).alfa*trays([top:topdown:bot]).rhoV)); |
---|
1125 | |
---|
1126 | CONNECTIONS |
---|
1127 | #vapor |
---|
1128 | reb.OutletV to trays(bot).InletV; |
---|
1129 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
1130 | |
---|
1131 | #liquid |
---|
1132 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
1133 | trays(bot).OutletL to tbottom.Inlet; |
---|
1134 | tbottom.Outlet to spbottom.Inlet; |
---|
1135 | spbottom.Outlet2 to reb.InletL; |
---|
1136 | end |
---|
1137 | |
---|
1138 | |
---|
1139 | #* ------------------------------------------------------------------- |
---|
1140 | * Reboiled Absorption Column model with: |
---|
1141 | * |
---|
1142 | * - NTrays like tray; |
---|
1143 | * - a kettle reboiler; |
---|
1144 | * |
---|
1145 | * ------------------------------------------------------------------*# |
---|
1146 | Model Reboiled_Absorption_kettle |
---|
1147 | ATTRIBUTES |
---|
1148 | Pallete = true; |
---|
1149 | Icon = "icon/ReboiledKettle"; |
---|
1150 | Brief = "Model of a reboiled absorption column with dynamic reboiler."; |
---|
1151 | Info = |
---|
1152 | "Specify: |
---|
1153 | * the feed stream of each tray (Inlet); |
---|
1154 | * the Murphree eficiency for each tray Emv; |
---|
1155 | * the InletL stream of the top tray; |
---|
1156 | * the heat supllied in the reboiler; |
---|
1157 | * the reboiler liquid outlet flow (OutletL.F); |
---|
1158 | |
---|
1159 | Initial Conditions: |
---|
1160 | * the trays temperature (OutletL.T); |
---|
1161 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
1162 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
1163 | |
---|
1164 | * the reboiler temperature (OutletL.T); |
---|
1165 | * the reboiler liquid level (Level); |
---|
1166 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
1167 | "; |
---|
1168 | |
---|
1169 | PARAMETERS |
---|
1170 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
1171 | outer NComp as Integer; |
---|
1172 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
1173 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
1174 | top as Integer(Brief="Number of top tray"); |
---|
1175 | bot as Integer(Brief="Number of bottom tray"); |
---|
1176 | |
---|
1177 | SET |
---|
1178 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
1179 | bot = NTrays/top; |
---|
1180 | |
---|
1181 | VARIABLES |
---|
1182 | trays(NTrays) as tray; |
---|
1183 | reb as reboiler; |
---|
1184 | |
---|
1185 | EQUATIONS |
---|
1186 | if (reb.OutletV.P > reb.InletL.P) then |
---|
1187 | "Pressure Drop through the tray" |
---|
1188 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
1189 | / (trays(bot).beta*reb.rhoV) ); |
---|
1190 | else |
---|
1191 | "Prato selado" |
---|
1192 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
1193 | end |
---|
1194 | |
---|
1195 | "Pressure Drop through the tray" |
---|
1196 | trays([top:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
1197 | (trays([top:topdown:bot]).OutletV.P - |
---|
1198 | trays([top:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
1199 | trays([top:topdown:bot]).Ah/trays([top:topdown:bot]).vV * |
---|
1200 | sqrt(2*(trays([top:topdown:bot]).OutletV.P - |
---|
1201 | trays([top:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
1202 | (trays([top:topdown:bot]).alfa*trays([top:topdown:bot]).rhoV)); |
---|
1203 | |
---|
1204 | CONNECTIONS |
---|
1205 | #vapor |
---|
1206 | reb.OutletV to trays(bot).InletV; |
---|
1207 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
1208 | |
---|
1209 | #liquid |
---|
1210 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
1211 | trays(bot).OutletL to reb.InletL; |
---|
1212 | end |
---|
1213 | |
---|
1214 | |
---|
1215 | #* ------------------------------------------------------------------- |
---|
1216 | * Reboiled Absorption Column model with: |
---|
1217 | * |
---|
1218 | * - NTrays like tray; |
---|
1219 | * - a vessel in the bottom of column; |
---|
1220 | * - a splitter which separate the bottom product and the stream to reboiler; |
---|
1221 | * - steady state reboiler (thermosyphon); |
---|
1222 | * |
---|
1223 | * ------------------------------------------------------------------*# |
---|
1224 | Model Reboiled_Absorption_thermosyphon |
---|
1225 | ATTRIBUTES |
---|
1226 | Pallete = true; |
---|
1227 | Icon = "icon/ReboiledThermosyphon"; |
---|
1228 | Brief = "Model of a reboiled absorption column with steady reboiler."; |
---|
1229 | Info = |
---|
1230 | "Specify: |
---|
1231 | * the feed stream of each tray (Inlet); |
---|
1232 | * the Murphree eficiency for each tray (Emv); |
---|
1233 | * the InletL stream of the top tray; |
---|
1234 | * the heat supllied in bottom tank; |
---|
1235 | * the heat supllied in the reboiler; |
---|
1236 | * the Outlet1 flow in the bottom splitter (spbottom.Outlet1.F) that corresponds to the bottom product; |
---|
1237 | |
---|
1238 | Initial Conditions: |
---|
1239 | * the trays temperature (OutletL.T); |
---|
1240 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
1241 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
1242 | |
---|
1243 | * the bottom tank temperature (OutletL.T); |
---|
1244 | * the bottom tank liquid level (Level); |
---|
1245 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
1246 | "; |
---|
1247 | |
---|
1248 | PARAMETERS |
---|
1249 | outer PP as Plugin(Brief = "External Physical Properties", Type="PP"); |
---|
1250 | outer NComp as Integer; |
---|
1251 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
1252 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
1253 | top as Integer(Brief="Number of top tray"); |
---|
1254 | bot as Integer(Brief="Number of bottom tray"); |
---|
1255 | |
---|
1256 | SET |
---|
1257 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
1258 | bot = NTrays/top; |
---|
1259 | |
---|
1260 | VARIABLES |
---|
1261 | trays(NTrays) as tray; |
---|
1262 | reb as reboilerSteady; |
---|
1263 | spbottom as splitter; |
---|
1264 | tbottom as tank; |
---|
1265 | |
---|
1266 | EQUATIONS |
---|
1267 | if (reb.OutletV.P > reb.InletL.P) then |
---|
1268 | "Pressure Drop through the tray" |
---|
1269 | reb.OutletV.F = trays(bot).Ah/reb.vV * sqrt((reb.OutletV.P - trays(bot).OutletL.P) |
---|
1270 | / (trays(bot).alfa*reb.rhoV) ); |
---|
1271 | else |
---|
1272 | "Prato selado" |
---|
1273 | reb.OutletV.F = 0.0 * 'mol/s'; |
---|
1274 | end |
---|
1275 | |
---|
1276 | "Pressure Drop through the tray" |
---|
1277 | trays([top:topdown:bot]).OutletV.F = (1 + tanh(1 * |
---|
1278 | (trays([top:topdown:bot]).OutletV.P - |
---|
1279 | trays([top:topdown:bot]).InletL.P)/'Pa'))/2 * |
---|
1280 | trays([top:topdown:bot]).Ah/trays([top:topdown:bot]).vV * |
---|
1281 | sqrt(2*(trays([top:topdown:bot]).OutletV.P - |
---|
1282 | trays([top:topdown:bot]).InletL.P + 1e-8 * 'atm') / |
---|
1283 | (trays([top:topdown:bot]).alfa*trays([top:topdown:bot]).rhoV)); |
---|
1284 | |
---|
1285 | CONNECTIONS |
---|
1286 | #vapor |
---|
1287 | reb.OutletV to trays(bot).InletV; |
---|
1288 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
1289 | |
---|
1290 | #liquid |
---|
1291 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
1292 | trays(bot).OutletL to tbottom.Inlet; |
---|
1293 | tbottom.Outlet to spbottom.Inlet; |
---|
1294 | spbottom.Outlet2 to reb.InletL; |
---|
1295 | end |
---|
1296 | |
---|
1297 | #* ------------------------------------------------------------------- |
---|
1298 | * Reactive Distillation Column |
---|
1299 | * |
---|
1300 | * ------------------------------------------------------------------*# |
---|
1301 | Model ReactiveDistillation |
---|
1302 | ATTRIBUTES |
---|
1303 | Pallete = true; |
---|
1304 | Icon = "icon/DistillationKettleCond"; |
---|
1305 | Brief = "Model of a reactive distillation column with dynamic condenser and reboiler."; |
---|
1306 | Info = |
---|
1307 | "Specify: |
---|
1308 | * the reaction related variables for each tray, condenser and reboiler; |
---|
1309 | * the feed stream of each tray (Inlet); |
---|
1310 | * the Murphree eficiency for each tray Emv; |
---|
1311 | * the pump pressure difference; |
---|
1312 | * the heat supllied in reboiler and condenser; |
---|
1313 | * the condenser vapor outlet flow (OutletV.F); |
---|
1314 | * the reboiler liquid outlet flow (OutletL.F); |
---|
1315 | * both splitter outlet flows OR one of the splitter outlet flows and the splitter frac. |
---|
1316 | |
---|
1317 | Initial Conditions: |
---|
1318 | * the trays temperature (OutletL.T); |
---|
1319 | * the trays liquid level (Level) OR the trays liquid flow (OutletL.F); |
---|
1320 | * (NoComps - 1) OutletL (OR OutletV) compositions for each tray; |
---|
1321 | |
---|
1322 | * the condenser temperature (OutletL.T); |
---|
1323 | * the condenser liquid level (Level); |
---|
1324 | * (NoComps - 1) OutletL (OR OutletV) compositions; |
---|
1325 | |
---|
1326 | * the reboiler temperature (OutletL.T); |
---|
1327 | * the reboiler liquid level (Level); |
---|
1328 | * (NoComps - 1) OutletL (OR OutletV) compositions. |
---|
1329 | "; |
---|
1330 | |
---|
1331 | PARAMETERS |
---|
1332 | outer PP as Plugin(Type="PP"); |
---|
1333 | outer NComp as Integer; |
---|
1334 | NTrays as Integer(Brief="Number of trays", Default=2); |
---|
1335 | topdown as Integer(Brief="Trays counting (1=top-down, -1=bottom-up)", Default=1); |
---|
1336 | top as Integer(Brief="Number of top tray"); |
---|
1337 | bot as Integer(Brief="Number of bottom tray"); |
---|
1338 | alfacond as Real; |
---|
1339 | |
---|
1340 | VapourFlow as Switcher(Valid = ["on", "off"], Default = "off"); |
---|
1341 | |
---|
1342 | SET |
---|
1343 | top = (NTrays-1)*(1-topdown)/2+1; |
---|
1344 | bot = NTrays/top; |
---|
1345 | |
---|
1346 | VARIABLES |
---|
1347 | trays(NTrays) as trayReact; |
---|
1348 | cond as condenserReact; |
---|
1349 | reb as reboilerReact; |
---|
1350 | sp as splitter; |
---|
1351 | p as pump; |
---|
1352 | |
---|
1353 | EQUATIONS |
---|
1354 | |
---|
1355 | switch VapourFlow |
---|
1356 | case "on": |
---|
1357 | "Pressure Drop through the condenser" |
---|
1358 | cond.InletV.F*trays(top).vV / 'm^2' = |
---|
1359 | sqrt((trays(top).OutletV.P - cond.OutletL.P + 1e-8 * 'atm')/(trays(top).rhoV*alfacond)); |
---|
1360 | when trays(top).OutletV.P < cond.OutletL.P switchto "off"; |
---|
1361 | |
---|
1362 | case "off": |
---|
1363 | "Prato selado" |
---|
1364 | cond.InletV.F = 0.0 * 'mol/s'; |
---|
1365 | when trays(top).OutletV.P > cond.OutletL.P + 1e-3 * 'atm' switchto "on"; |
---|
1366 | end |
---|
1367 | |
---|
1368 | CONNECTIONS |
---|
1369 | #vapor |
---|
1370 | reb.OutletV to trays(bot).InletV; |
---|
1371 | trays([top+topdown:topdown:bot]).OutletV to trays([top:topdown:bot-topdown]).InletV; |
---|
1372 | trays(top).OutletV to cond.InletV; |
---|
1373 | |
---|
1374 | #liquid |
---|
1375 | cond.OutletL to sp.Inlet; |
---|
1376 | sp.Outlet2 to p.Inlet; |
---|
1377 | p.Outlet to trays(top).InletL; |
---|
1378 | trays([top:topdown:bot-topdown]).OutletL to trays([top+topdown:topdown:bot]).InletL; |
---|
1379 | trays(bot).OutletL to reb.InletL; |
---|
1380 | |
---|
1381 | end |
---|