source: trunk/eml/pressure_changers/pump.mso @ 304

#*-------------------------------------------------------------------
* EMSO Model Library (EML) Copyright (C) 2004 - 2007 ALSOC.
*
* This LIBRARY is free software; you can distribute it and/or modify
* it under the therms of the ALSOC FREE LICENSE as available at
* http://www.enq.ufrgs.br/alsoc.
*
* EMSO Copyright (C) 2004 - 2007 ALSOC, original code
* from http://www.rps.eng.br Copyright (C) 2002-2004.
* All rights reserved.
*
* EMSO is distributed under the therms of the ALSOC LICENSE as
* available at http://www.enq.ufrgs.br/alsoc.
*
*----------------------------------------------------------------------
* Author: Andrey Copat, Estefane S. Horn, Marcos L. Alencastro
* $Id: pump.mso 277 2007-06-16 20:17:45Z paula $
*--------------------------------------------------------------------*#

using "pressure_changers/flux_machine_basic";

Model centrifugal_pump as flux_machine_basic
        ATTRIBUTES
        Pallete         = true;
        Icon            = "CentrifugalPump"; 
        Brief           = "Model of a centrifugal pump.";
        Info            =
        "Assumptions:
         * Steady State;
         * Only Liquid;
         * Adiabatic;
         * Isentropic.
        
        Specify: 
         * the inlet stream;
         * the Pressure Increase Pdiff.
        ";
        
        PARAMETERS
        outer PP        as Plugin                       (Brief = "External Physical Properties", Type="PP");
        outer NComp     as Integer                      (Brief = "Number of chemical components", Lower = 1);
        Mw(NComp)       as molweight            (Brief = "Molar Weight");
        Eff             as positive             (Default = 0.72, Brief = "Pump Efficiency");
        Meff            as positive             (Default = 0.95, Brief = "Brake Efficiency");
        Beta            as positive             (Default = 0, Brief = "Volumetric Expansivity", Unit = '1/K');
        g                       as acceleration         (Brief = "Gravity Acceleration", Default = 9.81);
        N                       as vel_angular          (Brief = "Rotation", Default = 100);
        Lev                     as length                       (Brief = "Loss Friction", Default = 0);
        
        VARIABLES
        rho               as dens_mass          (Brief = "Specific Mass");
        Cp        as cp_mol                     (Brief = "Heat Capacity");
        FPower    as power                      (Brief = "Fluid Power");
        BPower    as power                      (Brief = "Brake Power");
        EPower    as power                      (Brief = "Eletrical Potency");
        Pdiff     as press_delta        (Brief = "Pressure Increase", DisplayUnit='kPa');
        Pratio    as positive           (Brief = "Pressure Ratio");     
        Head      as head                       (Brief = "Head Developed"); 
        Head_is   as head                       (Brief = "Isoentripic Head"); 
        Mwm       as molweight          (Brief = "Mixture Molar Weight");
        pvm               as pressure           (Brief = "Mixture Vapour Pressure");                    
        NPSHa     as length                     (Brief = "Available Net Positive Suction Head");
        NS                as positive           (Brief = "Specific Speed", Unit = '(rpm*(gal/min)^0.5)/(m^3/4)');
        Q                 as flow_vol           (Brief = "Volumetric Flow Rate");
        vm                as vol_mol            (Brief = "Mixture Molar Volume");
        
        SET
        Mw = PP.MolecularWeight();
        
        EQUATIONS
        #Mixtures Properties
        "Calculate Mwm for Inlet Mixture"
        Mwm = sum(Mw([1:NComp])*Inlet.z([1:NComp]));

        "Calculate Cp Using a External Physical Properties Routine"
        Cp = PP.LiquidCp(Inlet.T,Inlet.P,Inlet.z);
        
        "Calculate rho using a External Physical Properties Routine"
        rho = PP.LiquidDensity(Inlet.T,Inlet.P,Inlet.z);

        "Calculate Mixture Vapour Pressure"
        [pvm] = PP.BubbleP(Inlet.T,Inlet.z); 
        
        "Calculate Outlet Vapour Fraction"
        Outlet.v = PP.VapourFraction(Outlet.T, Outlet.P, Outlet.z);
        
        "Calculate Liquid Molar Volume"
        vm = PP.LiquidVolume(Inlet.T,Inlet.P,Inlet.z);
        
        #Mass and Energy Balance and Pump Equations     
        "Calculate Outlet Stream Pressure"
        Outlet.P = Inlet.P + Pdiff;
        
        "Pratio Definition"
        Outlet.P = Inlet.P * Pratio;
        
        "Calculate Isentropic Head"
        Head_is = Pdiff * Mwm/rho;

        "Calculate Real Head"
        Head = Head_is/(Eff*Meff); 
        
        "Calculate Outlet Enthalpy"
        Outlet.h - Inlet.h = Head;
        
        "Calculate Fluid Power"
        FPower = Head_is * Inlet.F;

        "Calculate Brake Power"
        BPower * Eff = FPower;

        "Calculate Eletric Power"
        BPower = EPower * Meff;
        
        "Calculate Outlet Temperature"
        (Outlet.T - Inlet.T) * Cp = (Outlet.h - Inlet.h) -  Pdiff * Mwm / rho * (1 - Beta * Inlet.T);
        
        "Molar Balance"
        Outlet.F = Inlet.F;

        "Calculate Outlet Composition"
        Outlet.z = Inlet.z;
        
        "Calculate Net Positive Suction Head"
        NPSHa = - Lev + (Inlet.P - pvm)/(g*rho); #If Inlet.P is the suction pump pressure, Lev is 0.
        
        "Calculate Volumetric Flow Rate"
        Q = Inlet.F*vm;
        
        "Calculate Specific Speed"
        NS = N*(Q^0.5)/(Head^3/4);
        
end


#*-------------------------------------------------------------------
* Model of a pump (simplified, used in distillation column model)
*----------------------------------------------------------------------
* Author: Paula B. Staudt
*--------------------------------------------------------------------*#

Model pump
        ATTRIBUTES
        Pallete         = true;
        Icon            = "Pump"; 
        Brief           = "Model of a simplified pump, used in distillation column model.";
        Info            =
        "Specify: 
         * the inlet stream;
         * the pump press delta dP.
        ";
        
        PARAMETERS
outer PP as Plugin (Brief = "External Physical Properties", Type="PP");
outer NComp as Integer;
        
        VARIABLES
in      Inlet as stream;
out     Outlet as streamPH;
        
        dP as press_delta (Brief="Pump head");
        
        EQUATIONS
        "Molar Balance"
        Inlet.F = Outlet.F;
        Inlet.z = Outlet.z;
        
        "Pump head"
        Outlet.P = Inlet.P + dP;
        
        "FIXME: pump potency"
        Outlet.h = Inlet.h;
end