1 | #*------------------------------------------------------------------- |
---|
2 | * EMSO Model Library (EML) Copyright (C) 2004 - 2007 ALSOC. |
---|
3 | * |
---|
4 | * This LIBRARY is free software; you can distribute it and/or modify |
---|
5 | * it under the therms of the ALSOC FREE LICENSE as available at |
---|
6 | * http://www.enq.ufrgs.br/alsoc. |
---|
7 | * |
---|
8 | * EMSO Copyright (C) 2004 - 2007 ALSOC, original code |
---|
9 | * from http://www.rps.eng.br Copyright (C) 2002-2004. |
---|
10 | * All rights reserved. |
---|
11 | * |
---|
12 | * EMSO is distributed under the therms of the ALSOC LICENSE as |
---|
13 | * available at http://www.enq.ufrgs.br/alsoc. |
---|
14 | * |
---|
15 | *-------------------------------------------------------------------- |
---|
16 | * Author: Núbia do Carmo Ferreira |
---|
17 | * $Id: HeatExchangerDetailed.mso 197 2007-03-08 14:31:57Z bicca $ |
---|
18 | *------------------------------------------------------------------*# |
---|
19 | |
---|
20 | using "heat_exchangers/HeatExchangerSimplified"; |
---|
21 | |
---|
22 | # This model is valid if 14m^2 < A < 1100 m^2 |
---|
23 | |
---|
24 | Model HeatExchanger_LMTD_cost as HeatExchanger_LMTD |
---|
25 | ATTRIBUTES |
---|
26 | Pallete = true; |
---|
27 | Icon = "icon/HeatExchanger_LMTD"; |
---|
28 | Brief = "Heat Exchanger Block - LMTD Method"; |
---|
29 | Info = |
---|
30 | "to be documented."; |
---|
31 | |
---|
32 | PARAMETERS |
---|
33 | Material as Switcher (Valid = ["Stainless steel 316", "Stainless steel 304", "Stainless steel 347", "Nickel 200", "Monel 400", "Inconel 600", "Incoloy 825", "Titanium", "Hastelloy"], |
---|
34 | Default = "Stainless steel 316"); |
---|
35 | Cost(8,3) as Real; |
---|
36 | |
---|
37 | VARIABLES |
---|
38 | Ce as currency (Brief="Capital Cost"); |
---|
39 | Cb as currency (Brief="Basic Cost"); |
---|
40 | Fd as positive (Brief="Cost Factor based on the type of the heat exchanger"); |
---|
41 | Fp as positive (Brief="Cost Factor based on the project pressure"); |
---|
42 | Fm as positive (Brief="Cost Factor based on the construction material"); |
---|
43 | Pmax as pressure (Brief="Average Pressure"); |
---|
44 | |
---|
45 | EQUATIONS |
---|
46 | "Average pressure" |
---|
47 | Pmax = max( [HotSide.Properties.Average.P , ColdSide.Properties.Average.P] ); |
---|
48 | |
---|
49 | "Capital Cost" |
---|
50 | Ce = Cb*Fd*Fp*Fm; |
---|
51 | |
---|
52 | "Basic Cost" |
---|
53 | Cb = 'US$'*exp(Cost(1,1) + Cost(1,2)*ln(Details.A/'m^2') + Cost(1,3)*(ln(Details.A/'m^2'))^2); |
---|
54 | |
---|
55 | "Cost Factor based on the type of the heat exchanger" |
---|
56 | Fd = exp(Cost(2,1) + Cost(2,2)*ln(Details.A/'m^2') + Cost(2,3)*ln(Details.A/'m^2')); |
---|
57 | |
---|
58 | if Pmax <= 700 * 'kPa' then |
---|
59 | "Cost Factor based on the project pressure" # verificar |
---|
60 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
61 | else if 700 * 'kPa' < Pmax and Pmax < 2100 * 'kPa' then |
---|
62 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
63 | else if 2100 * 'kPa' < Pmax and Pmax < 4200 * 'kPa' then |
---|
64 | Fp = Cost(6,1) + Cost(6,2)*ln(Details.A/'m^2'); |
---|
65 | else if 4200 * 'kPa' < Pmax and Pmax < 6200 * 'kPa' then |
---|
66 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); |
---|
67 | else |
---|
68 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); # verificar |
---|
69 | end |
---|
70 | end |
---|
71 | end |
---|
72 | end |
---|
73 | |
---|
74 | "Cost Factor based on the construction material" |
---|
75 | Fm = Cost(8,1) + Cost(8,2)*ln(Details.A/'m^2'); |
---|
76 | |
---|
77 | end |
---|
78 | |
---|
79 | Model Shell_and_tubes_LMTD_cost as Shell_and_Tubes_LMTD |
---|
80 | ATTRIBUTES |
---|
81 | Pallete = true; |
---|
82 | Icon = "icon/Shell_and_Tubes_LMTD"; |
---|
83 | Brief = "Shell and Tubes Heat Exchanger with 1 or 2 shell pass - LMTD Method"; |
---|
84 | Info = |
---|
85 | "to be documented."; |
---|
86 | |
---|
87 | PARAMETERS |
---|
88 | Material as Switcher (Valid = ["Stainless steel 316", "Stainless steel 304", "Stainless steel 347", "Nickel 200", "Monel 400", "Inconel 600", "Incoloy 825", "Titanium", "Hastelloy"], |
---|
89 | Default = "Stainless steel 316"); |
---|
90 | Cost(8,3) as Real; |
---|
91 | |
---|
92 | VARIABLES |
---|
93 | Ce as currency (Brief="Capital Cost"); |
---|
94 | Cb as currency (Brief="Basic Cost"); |
---|
95 | Fd as positive (Brief="Cost Factor based on the type of the heat exchanger"); |
---|
96 | Fp as positive (Brief="Cost Factor based on the project pressure"); |
---|
97 | Fm as positive (Brief="Cost Factor based on the construction material"); |
---|
98 | Pmax as pressure (Brief="Average Pressure"); |
---|
99 | |
---|
100 | EQUATIONS |
---|
101 | "Average pressure" |
---|
102 | Pmax = max( [HotSide.Properties.Average.P , ColdSide.Properties.Average.P] ); |
---|
103 | |
---|
104 | "Capital Cost" |
---|
105 | Ce = Cb*Fd*Fp*Fm; |
---|
106 | |
---|
107 | "Basic Cost" |
---|
108 | Cb = 'US$'*exp(Cost(1,1) + Cost(1,2)*ln(Details.A/'m^2') + Cost(1,3)*(ln(Details.A/'m^2'))^2); |
---|
109 | |
---|
110 | "Cost Factor based on the type of the heat exchanger" |
---|
111 | Fd = exp(Cost(2,1) + Cost(2,2)*ln(Details.A/'m^2') + Cost(2,3)*ln(Details.A/'m^2')); |
---|
112 | |
---|
113 | if Pmax <= 700 * 'kPa' then |
---|
114 | "Cost Factor based on the project pressure" # verificar |
---|
115 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
116 | else if 700 * 'kPa' < Pmax and Pmax < 2100 * 'kPa' then |
---|
117 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
118 | else if 2100 * 'kPa' < Pmax and Pmax < 4200 * 'kPa' then |
---|
119 | Fp = Cost(6,1) + Cost(6,2)*ln(Details.A/'m^2'); |
---|
120 | else if 4200 * 'kPa' < Pmax and Pmax < 6200 * 'kPa' then |
---|
121 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); |
---|
122 | else |
---|
123 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); # verificar |
---|
124 | end |
---|
125 | end |
---|
126 | end |
---|
127 | end |
---|
128 | |
---|
129 | "Cost Factor based on the construction material" |
---|
130 | Fm = Cost(8,1) + Cost(8,2)*ln(Details.A/'m^2'); |
---|
131 | |
---|
132 | end |
---|
133 | |
---|
134 | Model HeatExchanger_NTU_cost as HeatExchanger_NTU |
---|
135 | ATTRIBUTES |
---|
136 | Pallete = true; |
---|
137 | Icon = "icon/HeatExchanger_NTU"; |
---|
138 | Brief = "Heat Exchanger Block - NTU Method"; |
---|
139 | Info = |
---|
140 | "to be documented."; |
---|
141 | |
---|
142 | PARAMETERS |
---|
143 | Material as Switcher (Valid = ["Stainless steel 316", "Stainless steel 304", "Stainless steel 347", "Nickel 200", "Monel 400", "Inconel 600", "Incoloy 825", "Titanium", "Hastelloy"], |
---|
144 | Default = "Stainless steel 316"); |
---|
145 | Cost(8,3) as Real; |
---|
146 | |
---|
147 | VARIABLES |
---|
148 | Ce as currency (Brief="Capital Cost"); |
---|
149 | Cb as currency (Brief="Basic Cost"); |
---|
150 | Fd as positive (Brief="Cost Factor based on the type of the heat exchanger"); |
---|
151 | Fp as positive (Brief="Cost Factor based on the project pressure"); |
---|
152 | Fm as positive (Brief="Cost Factor based on the construction material"); |
---|
153 | Pmax as pressure (Brief="Average Pressure"); |
---|
154 | |
---|
155 | EQUATIONS |
---|
156 | "Average pressure" |
---|
157 | Pmax = max( [HotSide.Properties.Average.P , ColdSide.Properties.Average.P] ); |
---|
158 | |
---|
159 | "Capital Cost" |
---|
160 | Ce = Cb*Fd*Fp*Fm; |
---|
161 | |
---|
162 | "Basic Cost" |
---|
163 | Cb = 'US$'*exp(Cost(1,1) + Cost(1,2)*ln(Details.A/'m^2') + Cost(1,3)*(ln(Details.A/'m^2'))^2); |
---|
164 | |
---|
165 | "Cost Factor based on the type of the heat exchanger" |
---|
166 | Fd = exp(Cost(2,1) + Cost(2,2)*ln(Details.A/'m^2') + Cost(2,3)*ln(Details.A/'m^2')); |
---|
167 | |
---|
168 | if Pmax <= 700 * 'kPa' then |
---|
169 | "Cost Factor based on the project pressure" # verificar |
---|
170 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
171 | else if 700 * 'kPa' < Pmax and Pmax < 2100 * 'kPa' then |
---|
172 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
173 | else if 2100 * 'kPa' < Pmax and Pmax < 4200 * 'kPa' then |
---|
174 | Fp = Cost(6,1) + Cost(6,2)*ln(Details.A/'m^2'); |
---|
175 | else if 4200 * 'kPa' < Pmax and Pmax < 6200 * 'kPa' then |
---|
176 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); |
---|
177 | else |
---|
178 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); # verificar |
---|
179 | end |
---|
180 | end |
---|
181 | end |
---|
182 | end |
---|
183 | |
---|
184 | "Cost Factor based on the construction material" |
---|
185 | Fm = Cost(8,1) + Cost(8,2)*ln(Details.A/'m^2'); |
---|
186 | |
---|
187 | end |
---|
188 | |
---|
189 | Model Shell_and_tubes_NTU_cost as Shell_and_Tubes_NTU |
---|
190 | ATTRIBUTES |
---|
191 | Pallete = true; |
---|
192 | Icon = "icon/Shell_and_Tubes_NTU"; |
---|
193 | Brief = "Shell and Tubes Heat Exchanger with 1 or 2 shell pass - NTU Method"; |
---|
194 | Info = |
---|
195 | "to be documented."; |
---|
196 | |
---|
197 | PARAMETERS |
---|
198 | Material as Switcher (Valid = ["Stainless steel 316", "Stainless steel 304", "Stainless steel 347", "Nickel 200", "Monel 400", "Inconel 600", "Incoloy 825", "Titanium", "Hastelloy"], |
---|
199 | Default = "Stainless steel 316"); |
---|
200 | Cost(8,3) as Real; |
---|
201 | |
---|
202 | VARIABLES |
---|
203 | Ce as currency (Brief="Capital Cost"); |
---|
204 | Cb as currency (Brief="Basic Cost"); |
---|
205 | Fd as positive (Brief="Cost Factor based on the type of the heat exchanger"); |
---|
206 | Fp as positive (Brief="Cost Factor based on the project pressure"); |
---|
207 | Fm as positive (Brief="Cost Factor based on the construction material"); |
---|
208 | Pmax as pressure (Brief="Average Pressure"); |
---|
209 | |
---|
210 | EQUATIONS |
---|
211 | "Average pressure" |
---|
212 | Pmax = max( [HotSide.Properties.Average.P , ColdSide.Properties.Average.P] ); |
---|
213 | |
---|
214 | "Capital Cost" |
---|
215 | Ce = Cb*Fd*Fp*Fm; |
---|
216 | |
---|
217 | "Basic Cost" |
---|
218 | Cb = 'US$'*exp(Cost(1,1) + Cost(1,2)*ln(Details.A/'m^2') + Cost(1,3)*(ln(Details.A/'m^2'))^2); |
---|
219 | |
---|
220 | "Cost Factor based on the type of the heat exchanger" |
---|
221 | Fd = exp(Cost(2,1) + Cost(2,2)*ln(Details.A/'m^2') + Cost(2,3)*ln(Details.A/'m^2')); |
---|
222 | |
---|
223 | if Pmax <= 700 * 'kPa' then |
---|
224 | "Cost Factor based on the project pressure" # verificar |
---|
225 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
226 | else if 700 * 'kPa' < Pmax and Pmax < 2100 * 'kPa' then |
---|
227 | Fp = Cost(5,1) + Cost(5,2)*ln(Details.A/'m^2'); |
---|
228 | else if 2100 * 'kPa' < Pmax and Pmax < 4200 * 'kPa' then |
---|
229 | Fp = Cost(6,1) + Cost(6,2)*ln(Details.A/'m^2'); |
---|
230 | else if 4200 * 'kPa' < Pmax and Pmax < 6200 * 'kPa' then |
---|
231 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); |
---|
232 | else |
---|
233 | Fp = Cost(7,1) + Cost(7,2)*ln(Details.A/'m^2'); # verificar |
---|
234 | end |
---|
235 | end |
---|
236 | end |
---|
237 | end |
---|
238 | |
---|
239 | "Cost Factor based on the construction material" |
---|
240 | Fm = Cost(8,1) + Cost(8,2)*ln(Details.A/'m^2'); |
---|
241 | |
---|
242 | end |
---|
243 | |
---|