source: mso/eml/pressure_changers/pump.mso @ 57

#*------------------------------------------------------------------------
* This file is property of the author and cannot be used, copyed
* or modified without permission.
*
* Copyright (C) 2002-2006  the author
*-------------------------------------------------------------------------
* Authors:      Andrey Copat            Estefane da Silveira Horn
* $Id: pump.mso 57 2006-11-16 16:46:48Z paula $                                         Marcos Lovato Alencastro        
*                                                                                                               Date:   20/02/2006
*-------------------------------------------------------------------------
* -> Steady State
* -> Only Liquid
* -> Adiabatic
* -> Isentropic
*-------------------------------------------------------------------------*#
using "streams";
using "pressure_changers/flux_machine_basic";

Model centrifugal_pump as flux_machine_basic
        
        PARAMETERS
ext NComp       as Integer                      (Brief = "Number of chemical components", Lower = 1);
ext PP                  as CalcObject           (Brief = "External Physical Properties");
        Mw(NComp)       as molweight            (Brief = "Molar Weight");
        Eff             as positive             (Default = 0.72, Brief = "Pump Efficiency");
        Meff            as positive             (Default = 0.95, Brief = "Brake Efficiency");
        Beta            as positive             (Default = 0, Brief = "Volumetric Expansivity", Unit = "1/K");
        g                       as acceleration         (Brief = "Gravity Acceleration", Default = 9.81);
        N                       as vel_angular          (Brief = "Rotation", Default = 100);
        Lev                     as length                       (Brief = "Loss Friction", Default = 0);
        
        VARIABLES
        rho               as dens_mass          (Brief = "Specific Mass", Unit="kg/m^3");
        Cp        as cp_mol                     (Brief = "Heat Capacity", Unit="kJ/kmol/K");
        FPower    as power                      (Brief = "Fluid Power", Unit="kW");
        BPower    as power                      (Brief = "Brake Power",Unit="kW");
        EPower    as power                      (Brief = "Eletrical Potency", Unit="kW");
        Pdiff     as press_delta        (Brief = "Pressure Increase", Unit="kPa");
        Pratio    as positive           (Brief = "Pressure Ratio");     
        Head      as head                       (Brief = "Head Developed", Unit="kJ/kmol"); 
        Head_is   as head                       (Brief = "Isoentripic Head", Unit="kJ/kmol"); 
        Mwm       as molweight          (Brief = "Mixture Molar Weight");
        pvm               as pressure           (Brief = "Mixture Vapour Pressure", Unit = "kPa");                      
        NPSHa     as length                     (Brief = "Available Net Positive Suction Head");
        NS                as positive           (Brief = "Specific Speed", Unit = "(rpm*(gal/min)^0.5)/(m^3/4)");
        Q                 as flow_vol           (Brief = "Volumetric Flow Rate");
        vm                as vol_mol            (Brief = "Mixture Molar Volume", Unit = "m^3/kmol");
        
        SET
        Mw = PP.MolecularWeight();
        
        EQUATIONS
        #Mixtures Properties
        "Calculate Mwm for Inlet Mixture"
        Mwm = sum(Mw([1:NComp])*Inlet.z([1:NComp]));

        "Calculate Cp Using a External Physical Properties Routine"
        Cp = PP.LiquidCp(Inlet.T,Inlet.P,Inlet.z);
        
        "Calculate rho using a External Physical Properties Routine"
        rho = PP.LiquidDensity(Inlet.T,Inlet.P,Inlet.z);

        "Calculate Mixture Vapour Pressure"
        [pvm] = PP.BubbleP(Inlet.T,Inlet.z); 
        
        "Calculate Outlet Vapour Fraction"
        Outlet.v = PP.VapourFraction(Outlet.T, Outlet.P, Outlet.z);
        
        "Calculate Liquid Molar Volume"
        vm = PP.LiquidVolume(Inlet.T,Inlet.P,Inlet.z);
        
        #Mass and Energy Balance and Pump Equations     
        "Calculate Outlet Stream Pressure"
        Outlet.P = Inlet.P + Pdiff;
        
        "Pratio Definition"
        Outlet.P = Inlet.P * Pratio;
        
        "Calculate Isentropic Head"
        Head_is = Pdiff * Mwm/rho;

        "Calculate Real Head"
        Head = Head_is/(Eff*Meff); 
        
        "Calculate Outlet Enthalpy"
        Outlet.h - Inlet.h = Head;
        
        "Calculate Fluid Power"
        FPower = Head_is * Inlet.F;

        "Calculate Brake Power"
        BPower * Eff = FPower;

        "Calculate Eletric Power"
        BPower = EPower * Meff;
        
        "Calculate Outlet Temperature"
        (Outlet.T - Inlet.T) * Cp = (Outlet.h - Inlet.h) -  Pdiff * Mwm / rho * (1 - Beta * Inlet.T);
        
        "Molar Balance"
        Outlet.F = Inlet.F;

        "Calculate Outlet Composition"
        Outlet.z = Inlet.z;
        
        "Calculate Net Positive Suction Head"
        NPSHa = - Lev + (Inlet.P - pvm)/(g*rho); #If Inlet.P is the suction pump pressure, Lev is 0.
        
        "Calculate Volumetric Flow Rate"
        Q = Inlet.F*vm;
        
        "Calculate Specific Speed"
        NS = N*(Q^0.5)/(Head^3/4);
        
end


#*-------------------------------------------------------------------
* Model of a pump
*-------------------------------------------------------------------- 
*
*       Streams:
*               * an  inlet stream
*               * an  outlet stream
*
*       Specify:
*               * the inlet stream
*               * the pump press delta
*
*----------------------------------------------------------------------
* Author: Paula B. Staudt
* $Id: pump.mso 57 2006-11-16 16:46:48Z paula $
*--------------------------------------------------------------------*#


Model pump
        PARAMETERS
ext PP as CalcObject;
ext NComp as Integer;
        
        VARIABLES
in      Inlet as stream;
out     Outlet as stream_therm;
        
        dP as press_delta (Brief="Pump head");
        
        EQUATIONS
        "Molar Balance"
        Inlet.F = Outlet.F;
        Inlet.z = Outlet.z;
        
        "Pump head"
        Outlet.P = Inlet.P + dP;
        
        "Temperature"
        Outlet.T = Inlet.T;

        "Vapourisation Fraction"
        Outlet.v = Inlet.v;
end